John Deere Compact Loader 410E User Manual

S
P
E
C
I
F
I
C
A
T
I
O
N
S
ENGINE  
410E  
Type......................................................................................................................John Deere 4045T Turbocharged  
Rated power @ 2,200 rpm.................................................................................98 SAE gross hp (73 kW)  
90 SAE net hp (67 kW)  
Cylinders..............................................................................................................4  
Displacement......................................................................................................276 cu. in. (4.524 L)  
Fuel consumption, typical.................................................................................1.5 to 2.5 gal./hr. (5.7 to 9.5 L/h)  
Torque rise..........................................................................................................34 percent  
Maximum net torque.........................................................................................287 lb.-ft. (389 Nm)  
Lubrication..........................................................................................................pressure system with full-flow spin-on filter and cooler  
Air cleaner ..........................................................................................................dual stage dry type with safety element and precleaner  
Electrical system................................................................................................12 volt with 65-amp alternator  
Sucker-type cooling fan  
four-speed, helical cut gear, collar shift transmission synchronized in all gears with hydraulic  
reverser  
TRANSMISSION  
Torque converter, single stage, dual phase with 2.12:1  
stall ratio.......................................................................................................11 in. (280 mm)  
Travel speeds with 19.5L-24 rear tires ...........................................................Forward  
Gear 1............................................................................................................3.6 mph (5.8 km/h)  
Gear 2............................................................................................................5.9 mph (9.5 km/h)  
Gear 3............................................................................................................14.4 mph (23.2 km/h)  
Gear 4............................................................................................................24.4 mph (39.3 km/h)  
Reverse  
4.0 mph (6.4 km/h)  
6.6 mph (10.6 km/h)  
16.1 mph (25.9 km/h)  
27.2 mph (43.8 km/h)  
FINAL DRIVES  
BRAKES  
heavy-duty, inboard planetary final drives evenly distribute shock loads over three gears  
hydraulic wet disk, mounted inboard, self adjusting and self equalizing  
CAPACITIES  
Fuel tank (with ground level fueling) ..............................................................36 gal. (136 L)  
Engine coolant....................................................................................................17 qt. (16 L)  
Engine oil including filter..................................................................................14 qt. (13 L)  
Torque converter and transmission ...............................................................15 qt. (14 L)  
Hydraulic system ...............................................................................................25 gal. (95 L)  
Rear axle .............................................................................................................3.5 gal. (13 L)  
Mechanical-front-wheel-drive axle ...............................................................2.3 gal. (8.5 L)  
hydrostatic power steering conforms to SAE J1151, emergency steering to SAE J53  
STEERING  
Non-powered axle  
Curb turning radius with brakes ...............................................................11 ft. 8 in. (3.56 m)  
Without brakes .....................................................................................13 ft. 3 in. (4.04 m)  
Bucket clearance circle with brakes ......................................................31 ft. 8 in. (9.65 m)  
Without brakes .....................................................................................34 ft. 9 in. (10.59 m)  
Steering wheel turns, stop to stop...........................................................2.3 to 3.0  
Mechanical-front-wheel-drive  
Curb turning radius with brakes ...............................................................11 ft. 5 in. (3.48 m)  
Without brakes .....................................................................................13 ft. 6 in. (4.11 m)  
Bucket clearance circle with brakes ......................................................29 ft. 7 in. (9.02 m)  
Without brakes .....................................................................................33 ft. 8 in. (10.26 m)  
Steering wheel turns, stop to stop...........................................................2.5  
Axle oscillation, stop to stop, both axles .......................................................22 degrees  
Axle ratings (SAE J43)  
Front ..............................................................................................................22,360 lb. (10 140 kg)  
Rear ...............................................................................................................15,530 lb. (7045 kg)  
HYDRAULIC SYSTEM  
System.................................................................................................................pressure compensated load sensing (PCLS)  
Pressure, main relief.........................................................................................3,625 psi (25 000 kPa)  
Pump....................................................................................................................axial piston  
Flow @ 2,200 rpm ...............................................................................................42 gpm (159 L/min.)  
Filter, return oil...................................................................................................10-micron, spin-on vertical replaceable element  
16  
 
L
I
F
T
C
A
P
A
C
I
T
I
E
S
*
/
D
I
M
E
N
S
I
O
N
S
*Lift capacities are over-end values in lb. (kg) according to SAE J31. Figures listed are 87% of the maximum lift force available. Base vehicle includes counterweight.  
410E BACKHOE WITH  
STANDARD DIPPERSTICK  
410E BACKHOE WITH 4 FT. (1.22 M)  
EXTENDABLE DIPPERSTICK, RETRACTED  
410E BACKHOE WITH 4 FT. (1.22 M)  
EXTENDABLE DIPPERSTICK, EXTENDED  
4
3
2
1
0
1
2
3
4
4
3
2
1
0
1
2
3
4
4
3
2
1
0
1
2
3
4
2,036 (924)  
2,079 (943)  
3,450 (1565)  
5,094 (2311)  
12  
8
12  
8
2,962 (1344)  
2,989 (1356)  
12  
8
5,655 (2565)  
3,454 (1567)  
3,467 (1577)  
3,428 (1555)  
4,872  
3,371 (1529)  
3,398 (1541)  
3,541 (1606)  
5,394 (2447)  
5,494 (2492)  
6,055 (2746)  
(2210)  
2,088 (947)  
2,954 (1340)  
4,959 (2249)  
2,084 (945)  
2,071 (939)  
2,053 (931)  
2,893 (1312)  
2,823 (1280)  
2,750 (1247)  
2,680 (1216)  
2,614 (1186)  
5,446 (2470)  
3,366 (1527)  
3,289 (1492)  
DIPPER  
LIFT  
DIPPER  
LIFT  
DIPPER  
LIFT  
3,841 (1742)  
4,459 (2023)  
4
4
4
WITH  
WITH  
WITH  
BOOM  
AT 60°  
BOOM  
AT 60°  
BOOM  
AT 60°  
3,210 (1456)  
3,136 (1422)  
2,031 (921)  
2,014 (914)  
1,997 (906)  
0
0
0
SWING PIVOT  
SWING PIVOT  
SWING PIVOT  
3,062 (1389)  
3,010 (1365)  
BOOM  
LIFT  
BOOM  
LIFT  
BOOM  
LIFT  
2,558 (1160)  
4
4
4
1,988 (902)  
2,519 (1143)  
2,503 (1135)  
2,536 (1150)  
2,749 (1247)  
2,967 (1346)  
2,954 (1340)  
2,997 (1359)  
3,284 (1490)  
1,988 (902)  
2,010 (912)  
2,062 (935)  
8
8
8
12  
12  
12  
FEET  
FEET  
FEET  
0
0
4
8
12  
16  
20  
6
0
0
4
8
12  
16  
20  
6
24  
0
0
4
8
12  
16  
20  
6
METERS  
METERS  
METERS  
1
2
3
4
5
7
1
2
3
4
5
7
8
1
2
3
4
5
7
DIMENSIONS (SEE PAGE 19.)  
B
G
L
J
K
L
9 ft. 3 in. (2.82 m)  
c
d
a
b
H
A
e
f
F
82.7 in. (2100 mm)  
I
M
C
82.6 in. (2097 mm)  
L ROPS and cab  
E2  
D
E1  
18  
 
D
I
M
E
N
S
I
O
N
S
BACKHOE  
410E  
With Standard  
Backhoe*  
With Extendable Dipperstick*  
Retracted  
Extended  
A
B
C
D
E
Loading height, truck loading position...........................................................12 ft. 6 in. (3.81 m)  
Reach from center of swing mast...................................................................19 ft. 8 in. (5.99 m)  
Reach from center of rear axle .......................................................................23 ft. 4 in. (7.11 m)  
Maximum digging depth...................................................................................15 ft. 10 in. (4.83 m)  
Digging depth (SAE):  
12 ft. 8 in. (3.86 m)  
19 ft. 11 in. (6.07 m)  
23 ft. 7 in. (7.19 m)  
16 ft. 1 in. (4.90 m)  
15 ft. 6 in. (4.72 m)  
23 ft. 8 in. (7.21 m)  
27 ft. 4 in. (8.33 m)  
20 ft. (6.10 m)  
(1) 2-ft. (610 mm) flat bottom.............................................................................15 ft. 8 in. (4.78 m)  
(2) 8-ft. (2440 mm) flat bottom...........................................................................14 ft. 7 in. (4.45 m)  
Ground clearance, minimum............................................................................14 in. (356 mm)  
Bucket rotation...................................................................................................190 degrees  
Transport height.................................................................................................12 ft. 11 in. (3.94 m)  
Overall length, transport...................................................................................23 ft. 11 in. (7.29 m)  
Stabilizer width – transport with ROPS..........................................................7 ft. 2 in. (2.18 m)  
Stabilizer spread – operating...........................................................................10 ft. 2 in. (3.10 m)  
Stabilizer overall width – operating................................................................11 ft. 7 in. (3.53 m)  
15 ft. 11 in. (4.85 m)  
14 ft. 11 in. (4.55 m)  
14 in. (356 mm)  
19 ft. 11 in. (6.07 m)  
19 ft. 1 in. (5.82 m)  
14 in. (356 mm)  
F
G
H
I
190 degrees  
190 degrees  
12 ft. 10 in. (3.91 m)  
23 ft. 11 in. (7.29 m)  
7 ft. 2 in. (2.18 m)  
10 ft. 2 in. (3.10 m)  
11 ft. 7 in. (3.53 m)  
86 in. (2.18 m)  
12 ft. 10 in. (3.91 m)  
23 ft. 11 in. (7.29 m)  
7 ft. 2 in. (2.18 m)  
10 ft. 2 in. (3.10 m)  
11 ft. 7 in. (3.53 m)  
86 in. (2.18 m)  
J
K
L
M Width over tires..................................................................................................86 in. (2.18 m)  
*Backhoe specifications are with 24 in. x 7.5 cu. ft. (610 mm x 0.21 m3) bucket.  
LOADER PERFORMANCE WITH BUCKET OPTIONS  
1.25 cu. yd. (0.96 m3)  
1.30 cu. yd. (1.00 m3)  
1.50 cu. yd. (1.15 m3) 1.25 cu. yd. (0.96 m3)  
Heavy-Duty Long-Lip Heavy-Duty Long-Lip Heavy-Duty Long-Lip Multipurpose  
Operator control.................................................................................................single lever  
Breakout force ...................................................................................................10,210 lb. (45.4 kN)  
Lifting capacity, full height...............................................................................7,340 lb. (3332 kg)  
Height to bucket hinge pin, maximum............................................................11 ft. (3.35 m)  
Dump clearance, bucket at 45 degrees.........................................................8 ft. 4 in. (2.49 m)  
Bucket dump angle, maximum ........................................................................45 degrees  
Reach at full height, bucket at 45 degrees....................................................35.5 in. (902 mm)  
Rollback angle at ground level........................................................................40 degrees  
Digging depth below ground, bucket level....................................................4.2 in. (107 mm)  
Raising time to full height.................................................................................4.8 sec.  
Bucket dump time..............................................................................................1.4 sec.  
Bucket lowering time (power down)..............................................................2.3 sec.  
single lever  
single lever  
10,170 lb. (45.2 kN)  
7,070 lb. (3207 kg)  
11 ft. (3.35 m)  
8 ft. 9 in. (2.67 m)  
45 degrees  
dual lever  
10,300 lb. (45.8 kN)  
7,200 lb. (3266 kg)  
11 ft. (3.35 m)  
8 ft. 10 in. (2.69 m)  
45 degrees  
9,700 lb. (43.1 kN)  
6,700 lb. (3039 kg)  
11 ft. (3.35 m)  
8 ft. 8 in. (2.64 m)  
45 degrees  
a
b
c
d
e
f
30.0 in. (762 mm)  
40 degrees  
31.0 in. (787 mm)  
40 degrees  
32.2 in. (818 mm)  
40 degrees  
6.7 in. (170 mm)  
4.8 sec.  
6.2 in. (157 mm)  
4.8 sec.  
5.9 in. (150 mm)  
4.8 sec.  
1.4 sec.  
1.4 sec.  
1.4 sec.  
2.3 sec.  
2.3 sec.  
2.3 sec.  
LIFT CAPACITY WITH QUICK COUPLER/FORKS  
A1 Maximum height ................................................................................................5,038 lb. (2287 kg)  
B1 Maximum reach.................................................................................................7,462 lb. (3388 kg)  
C1 At ground line.....................................................................................................9,853 lb. (4473 kg)  
D1 Below ground line..............................................................................................4.4 in. (112.7 mm) to bottom of tine / 2.7 in. (68.3 mm) to top of tine  
A1  
B1  
C1  
D1  
19  
 
A
D
D
I
T
I
O
N
A
L
E
Q
U
I
P
M
E
N
T
410E  
410E  
410E  
Heavy duty with lift loops  
Severe duty with lift loops  
I
I
I
Fuel gauge, illuminated electric  
Gauge package, illuminated electric  
Engine coolant temperature / Transmission oil temper-  
ature / Alternator volts / Fuel gauge  
Monitor system with audible and visual warning  
Engine air filter restriction indicator / Alternator indi-  
cator / Engine coolant temperature indicator with  
audible warning / Engine oil pressure indicator with  
audible warning / Hydraulic filter restriction indica-  
tor / Torque converter oil temperature indicator /  
Parking brake on/off indicator with audible warning /  
Seat belt indicator / Mechanical-front-wheel-drive  
on/off indicator / Beacon on/off indicator / Hydraulic  
oil temperature indicator  
G
I
ENGINE  
John Deere Model 4045T – 4.5 liter, 90 SAE net hp turbo-  
charged, isolation mounted  
Vertical spin-on engine oil filter  
Spin-on John Deere fuel filter with water separator  
Oil-to-water engine oil cooler  
Antifreeze, –34°F (–37°C)  
Coolant recovery tank  
Serpentine belt with automatic belt tensioner  
Sucker-type cooling fan  
Enclosed safety fan guard  
High ambient temperature engine cooling  
Dual element dry-type air cleaner  
Muffler, underhood with curved-end exhaust stack  
Chrome exhaust extension  
Electric ether starting aid  
Engine coolant heater, 1,000 watts  
G
Backhoe bucket coupler for “C” and “D” series John  
Deere buckets, Case buckets, and Cat buckets  
Extendible dipperstick, 4 ft. extension  
Auxiliary backhoe valve for swingers, thumbs, etc.  
Auxiliary backhoe valve for hammers, compactors  
Auxiliary backhoe plumbing for hammers, compactors  
SAE controlled load lowering device valves  
G
G
G
G
G
G
G
G
I
G
G
I
I
I
I
I
I
I
I
G
LOADER  
Hydraulic self leveling  
Return-to-dig feature  
Single-lever control with electric clutch cutoff switch  
Bucket-level indicator  
Loader boom service lock  
Auxiliary loader hydraulics with two-lever control  
Loader front coupler  
G
G
G
G
G
I
I
Seats and seat belts  
Non-suspension vinyl swivel seat without armrests  
Suspension vinyl swivel seat with armrests and lumbar  
support  
Suspension fabric swivel seat with armrests and lumbar  
support  
Air suspension vinyl swivel seat with armrests and  
lumbar support  
Air suspension fabric swivel seat with armrests and  
lumbar support  
2-in. seat belt with retractors  
3-in. seat belt with retractors  
Cab  
Headliner  
Dome light  
Left cab door  
Right cab door  
Tinted safety glass  
Two front and one rear windshield wipers  
Front windshield washer  
Fresh air intake heater/defroster/pressurizer  
40,000 Btu/hr. (11.7 kW) heater  
Air conditioning  
26,000 Btu/hr. (7.6 kW) output / CFC-free R134a  
refrigerant  
65-amp alternator  
G
I
Loader buckets  
POWER TRAIN  
Powershift transmission  
Torque converter with electrically actuated twist grip  
F-N-R in 1st through 4th gears  
Transmission with powershift reverser and torque  
converter  
Fully synchronized four forward, four reverse speeds /  
Isolation mounted to mainframe  
Transmission oil cooler  
Vertical spin-on transmission filter  
Electric forward-neutral-reverse control lever with neutral  
safety switch interlock  
Electric clutch cutoff on gearshift and loader levers  
Differential lock, electric foot-actuated  
Planetary final drives  
I
I
I
Less bucket, with bucket pins  
Heavy-duty buckets with bolt-on cutting edge, skid  
plates, and lift loops  
Multipurpose bucket with bolt-on cutting edge, skid  
plates, and lift loops  
G
I
I
G
I
HYDRAULIC SYSTEM  
G
I
I
G
G
G
I
G
G
I
G
42 gpm (159 L/min.) axial piston pump, PCLS system  
Independent hydraulic reservoir  
Hydraulic oil cooler  
“O”-ring face seal connectors  
10-micron vertical spin-on filter  
G
G
G
G
G
G
G
G
G
G
G
G
ELECTRICAL  
12-volt system  
65-amp alternator  
Single battery with 150-min. reserve capacity and 750 CCA  
Dual batteries with 300-min. reserve capacity and 1,500 CCA  
Positive terminal battery cover  
Blade-type multi-fused circuits  
By-pass start safety cover on starter  
G
G
G
I
G
G
G
Hydraulic service brakes  
Inboard, wet multi-disc, self adjusting and self equal-  
izing / Conform to SAE J1473  
Parking/emergency brake with electric switch control  
Spring applied, hydraulically released wet multi-disc /  
Independent of service brakes / Conforms to SAE J1473  
Hydrostatic power steering with emergency manual mode  
Non-powered front axle  
Mechanical-front-wheel-drive with limited slip differential  
Electric on/off control / Drive-shaft guard / Sealed axle  
Tires  
11L-16 F3 front tires  
14.5/75-16.1 F3 front tires  
12.5/80-18 traction front tires  
19.5L-24 R4 rear tires  
G
I
G
G
I
LIGHTS  
G
I
I
I
95-amp alternator  
AM/FM/weatherband radio  
Ride control  
Two front halogen driving/work lights, 32,500 candle-  
power each  
Two additional front halogen work lights, 32,500 candle-  
power each  
Two rear halogen work lights, 32,500 candlepower each  
Two front and two rear turn signal/flashing  
Two rear stop and tail  
G
I
OVERALL VEHICLE  
G
I
I
G
I
I
G
G
G
G
I
One-piece unitized construction mainframe  
Vehicle tiedowns, two front and one rear  
Remote grease bank for front axle  
Rigid mounted front bumper  
Front counterweights  
400 lb. (181 kg)  
650 lb. (295 kg)  
900 lb. (408 kg)  
1,150 lb. (522 kg)  
1,400 lb. (635 kg)  
Fuel tank, 36 gal. (136 L), ground level fueling  
Engine sideshields with sliding service access door  
Front grille screen  
Vandal protection for instrument panel, engine access  
doors, and fuel tank  
G
G
G
G
Two rear reflectors  
Rotating beacon  
21L-24 R4 rear tires  
Rear wheel spacers for use with chains  
OPERATOR’S STATION  
I
I
I
I
I
G
G
I
G
BACKHOE  
Modular-design ROPS/FOPS canopy with molded roof  
Isolation mounted / Conforms to SAE J1040  
Left and right front access  
Slip-resistant steps and ergonomically located handholds  
Molded floor mat  
G
Backhoe with standard dipperstick, 15 ft. 10 in. digging depth  
Backhoe controls  
G
G
G
G
G
G
G
G
G
I
G
G
I
G
G
G
Two-lever (Deere) controls  
Three-lever (Case) controls  
Four-lever (Ford) controls  
SAE excavator two-lever controls  
Backhoe transport lock lever  
Swing lock pin stored in operator’s station  
Stabilizer valve with two-direction anti-drift valves  
Pivoting stabilizers  
With dirt pads  
With reversible pads  
Stabilizer cylinder guards  
Backhoe buckets  
G
I
I
I
G
G
G
Headliner  
Coat hook  
Built-in beverage and Thermos® bottle holders  
Built-in Operator’s Manual storage compartment with manual  
Interior rearview mirror  
Reverse warning alarm  
G
Switchable to 97 dB(A) or 111 dB(A)  
Dent-resistant rear fenders  
Rear fender extensions  
Front fenders*  
SMV emblem  
Rental decal kit  
Special color paint*  
Quarter cab*  
Outside rearview mirrors  
Hand throttle with fuel economy setting at 2,100 rpm  
Suspended foot throttle  
Tilt steering  
Horn  
Key start switch with electric fuel shutoff  
Tachometer/hourmeter, illuminated electric  
G
I
I
G
I
I
I
I
I
I
Less bucket, with bucket pins  
Standard duty with lift loops  
G
I
KEY:  
G
Standard equipment  
I
Optional or special equipment  
*See your John Deere dealer for further information.  
Net engine power is with standard equipment including air cleaner, exhaust system,  
alternator, and cooling fan, at standard conditions per SAE J1349 and DIN 70 020,  
using No. 2-D fuel at 35 API gravity. No derating is required up to 10,000 feet (3050 m).  
Gross power is without cooling fan.  
Specifications and design subject to change without notice. Wherever applicable, specifications are in  
accordance with SAE standards. Except where otherwise noted, these specifications are based on a unit  
with 19.5L-24, 10 PR R4 rear tires, 11L-16, 12 PR F3 front tires, 1.30 cu. yd. (1.00 m3) loader bucket, and  
24 in. x 7.5 cu. ft. (610 mm x 0.21 m3) backhoe bucket.  
20  
 
DKA410E Litho in U.S.A. (00-03)  

Integra Stereo Receiver DTR 53 User Manual
Intel Stereo Receiver SBCEFCSW User Manual
ION Turntable TTUSB User Manual
JBL Car Speaker S266C User Manual
JVC Car Video System LVT2086 001A User Manual
JVC Flat Panel Television 0107TNH II IM User Manual
Kalorik Hot Beverage Maker USK JK 34446 User Manual
KitchenAid Computer Drive KSSS48M User Manual
KitchenAid Mixer KP50PS User Manual
Kodak Film Camera 5800 MRX User Manual